Brand new SU H2 carbs, made in England! SU continues to produce these carbs as they were originally supplied to the MG factory. These 1 1/4" H2s we...View full details
MG T-Type Sale Items!
Kit includes: 1 Camshaft (stock grind, replacement) 8 Tappets 8 Push rods
Made in the England, engineered for exact fit for the MG TC as original. Stainless Steel throughout, muffler is .304 stainless and pipes are .409 s...View full details
7 piece King Dick Whitworth socket set. Excellent for working on the T-Series MGs. Set includes the following sizes. 1/8W, 3/16W, 1/4W, 5/16W, 3/8...View full details
8 piece Whitworth combination wrench set. 1/8W, 3/16W, 1/4W, 5/16W, 3/8W, 7/16W, 1/2W, and 9/16W Whitworth sizes, packed in a convenient tool roll...View full details
6 Combination Wrench Set with case. Excellent for nuts on carbs, small electrical devices, various small nuts on T-series cars. Combination sizes:...View full details
Set of 3 Premium Quality flexible brake hoses for TD/TF. If one is bad, most likely all should be replaced. Get the set and save! Made in UK
This is a direct replacement for the MG TC and TD thermostat housing. It is all Stainless Steel, includes a removable 180°F/82°C standard thermosta...View full details
Excellent reproduction of the classic Lucas Fog Lamp, a great accessory for any T-Type! Set of two Lucas Fog Lamps 48 Watts per bulb
MG TD and TF Front Coil Spring Kit Contains: 19-061 Pair of Coil Springs, 19-068B Polyurethane A-Arm Bushing Set, 19-038 Link Seals, 19-059 Seals ...View full details
Early TD Carpet set w/mat sewn on. This for the FLAT floor models only. Same as the later TD carpet set except for the sewn on mat. Complete Carpet...View full details
Best Price! Complete brake pipe set for MG TC. Copper Nickle alloy, much more resistant to corrosion than original steel pipes. Does complete car, ...View full details
Complete Radiator Hose Kit, for MG TF. Includes Top Hose, 3 Lower Hoses and all Hose Clamps. Buy the kit and save!
Complete Radiator Hose Kit, for MG TC and TD. Includes Top Hose, 3 Lower Hoses and all Hose Clamps. Buy the kit and save!
Brake & Clutch Pedals, Pad set of 2 AKA 31-002
Minor Gasket Set for the XPAG, XPEG Engines. Includes Valve Cover Gasket, Side Cover Gasket, Side Cover Nut Washers, Valve Cover Thumb Nuts and Was...View full details
Original style thick cork gasket. Also known as part no. 03-059
Gasket for Tappet Inspection Plate, also called Side Cover Gasket AKA 03-018
Best Price! Complete brake pipe set for TD/TF LHD. Copper Nickle alloy, much more resistant to corrosion than original steel pipes. Does complete c...View full details
Made in the England, engineered for exact fit for the MG TD and TF as original. Stainless Steel throughout, muffler is .304 stainless and pipes are...View full details
Classic shift knob, as original, with correct pattern for all TC, TD, and TF.
Clip, 3.25 inches total length, set of 4 clips Vintage style strap fastener, multiple uses
Connects accelerator cable to carburetor linkage. Aso used on TC slow running cable. Can also be used for other British car carb linkages.
Plug for Master Cylinder inspection hole in floor.
Rubber pads on grille shell around headlamp mounts. Sold as set of 2
Chrome mounting bolt, nut and washer. Mounts bumper bar to bumper bracket. T-Type: 2 required for Front Bumper TD/TF, 3 required for TD Rear Bumper...View full details
Original NOS Lucas dimmer switch, Floor Mounted TD/TF Get a spare!
Also known as part no. 43-058 and 264-060
T-Types require 2 sizes of body piping to be correct. This kit contains both of the correct sizes. AKA Body Beading or Fender Welting, Black 27' of...View full details
While supplies last! Carb to Carb fuel line on MGAs and TFs (and TD MK IIs with only one fuel pump). The proper length to fit between H4 carbs. The...View full details
Complete Carpet Set, unbound as original. Made in USA, finest quality. Includes padding and all fasteners.
Back and rim only, glass is not included. The chrome is very good, but not concours. Reuse your glass and mount, improve the look of your dash at a...View full details
Also known as part no. 15-077 Also Known As 443-070
Complete assembly, includes mounting pad (gasket), screws to mount socket, and screws to mount plinth to fender.
Grommet for early TD tail lamp without rubber body, sold in pairs
Original style oil line banjo bolt (set of 2)
As originally supplied for MG TC master cylinder, heat shield between exhaust and master cylinder. This piece often goes missing, fits original and...View full details
Lower cost replacement style filler cap, with chain.
Spiff up your regulator with a nice new cover!
comes with: 1 Crane camshaft (stock replacement) 8 Elgin tappets (made in England, modified to work with crane cam) 8 Crane push rods (shorter to f...View full details
Schumacher, 1.5 amp Battery Maintainer, fully automated Approved for Under the hood mounting, microprocessor controlled, 6v/12v Auto Voltage Dectec...View full details
The TC ring gear has an ID of approximately 10 3/8", the ring has 93 teeth, which is correct for the TC starter pinion. This ring will not mesh wit...View full details