Featured MGT and MGB Parts

Set of 4 beautifully chromed eared knock-off with MG crest in center. Two Left Side, Two Right Side. Buy the set and save! REF 2-200-210, 2-200-220

Genuine Lockheed (Delphi) rear brake cylinders. Sold as a pair. Buy 2 and save! Includes bleeder and retaining circlip, roadster 62-80, GT 65-67 only

New reproduction insulation for the heat shield. This is often missing or damaged. Ceramic fiber can withstand up to 2300F, does not contain asbest...

New reproduction insulation for the heat shield. This is often missing or damaged. Ceramic fiber can withstand up to 2300F, does not contain asbest...

This clever Guide keeps your shoulder strap properly over your shoulder instead of chafing against your neck or even falling off your shoulder. It ...

For T-series wing lamps, dual contact socket, can be used for running lamp and or blinker. Accepts 35-103 Bulb AKA 157-600

If your fuel pump metal lines have been "hacked", this kit lets you hook up an original type fuel pump to shortened lines which no longer have the ...

Kit includes, Master cylinder, slave cylinder, hose and all 3 washers. Everything you need to refresh your clutch hydraulics. Buy the kit and save!  

Basic Kit, Wheel Cylinders &  Shoes for TD/TF,  for one car, front brakes.  Kit contains 4 brake shoes & 4 front brake cylinders Buy the ki...

Basic Kit, Wheel Cylinders &  Shoes for TD/TF,  for one car, rear brakes.  Kit contains 4 brake shoes, 2 wheel cylinders, 2 boots,  & 4 ant...

Superior Quality studs for cylinder head, complete set with nuts and washers. Rated at 190,000 psi. Special moly-based lubricant and torque instruc...

MG Through the Ages, poster,  16.5 X 22 inches printed in 1965. Printed by the Nuffield Press. A great poster showing every model MG from the 14/28...

Correct length, coiled covering, correctly threaded end with grease fitting as original. They don't call it an "emergency brake"  for nothing!  Mad...

Kit to eliminate oil leaking into rear brake drums. Includes: 2 nuts with lip seals (actual size 50mm, but 2" standard and 1 1/4 whitworth sockets ...

Complete set of springs and copper washers, enough to do one car. The job always goes quicker when you have all the parts at hand. Buy the kit and ...

Heavy Cast Aluminum Valve Cover with the MG crest cast in. Add some sparkle to your engine bay! Includes chrome vented cap, 2 rubber washers, 2 chr...

Heavy Cast Aluminum Valve Cover with crackle finish and the MG crest cast in. Add some style to your MGB's engine bay! Includes chrome vented cap, ...

A quick repair for when your MGB Heater Valve starts leaking! This clever kit should be in every MGB owner's tool kit. Contains a blanking plate, g...

Distributor fixing plate, includes points set and condenser. Fits all XPAG and XPEG distributors. Carry a spare!

 Mounts on the distributor fixing plate, XPAG or XPEG

LHD TD from (c)4237 & TF Our carpets sets are made to exacting specifications. They are bound only where original and include jute padding wher...

This kit includes all the rubber and polyurethane components to re-do the front suspension of the MG TD or TF. The kit includes superior quality Po...

Includes bumpers, overriders, packing, chrome bolts & nuts. Does one complete car. Brackets and Main Springs NOT included.

Includes bumpers, overriders (not shown), packing, brackets and main springs, chrome bolts & nuts.     Does one complete car.

Correct shade of red engine paint for the XPAG and XPEG engine and accessories. Best match we have seen to the original color.  Can't be shipped in...

Gasket included, Sealed bearings, no grease fitting AKA 07-052 AKA 434-010

We suggest no attempt be made to rebuild this master cylinder, as disassembly is very difficult without damaging some internal parts which are not ...

Set of 4 shoes, Roadster or GT, one set does one car. AKA 182-100

MGB front caliper, R/H, new, aftermarket AKA  180-516

New MGB front caliper, L/H, aftermarket replacement AKA 180-526

MGB semi-metallic brake pad set, one set does one car. Power Tune brand AKA 182-227

MGB ceramic brake pad set, one set does one car. Classic Gold Brand, premium brake pads, longer wearing and no dust  

Original style for 68-74 top entry cap, fits MGB distributor 1962-1974. Kit contains: Cap, Wire Set w/dielectric grease, Champion Spark Plugs, (N9Y...

Original style for 62-67 side entry cap, fits MGB distributor 1962-1974. Kit contains: Cap, Wire Set, Di-electric grease, Champion Spark Plugs, (N9...

Dual strut hood kit may be used on steel or alloy hoods. Easy to install, allows much higher hood opening for easier access. Replaces prop rod on e...

Dual strut trunk lid kit, 62-70 for trunks. Replaces prop rod on early cars, dual struts hold lid open and prevents damage to lid when attempting t...

Dual strut trunk lid kit, 72-80 for trunks. Replaces telescoping support, dual struts hold lid open and prevents damage to lid when attempting to c...

Dual strut hatch kit for the MGBGT rear hatch. No more struggling to lift the heavy hatch, dual struts easily lift hatch to full opening. Also, no ...

A very clever dual strut kit for the MGBGT spare tire lid. This makes the spare tire compartment much more usable. No more bumping your head and st...

Heater valve, MGB, 1962-1980 includes gasket Does not include cable stop, you must reuse yours or order part #473-070 AKA 360-410

Roller bearing type MGB release (throwout) bearing AKA 14-409

Brake abutment for rear brake TD and TF AKA 180-160

Fits MGB '72-80. 3D-Printed in the U.S.A. Black. Room for a cup, phone and some change.  Very handy indeed. 

Small version of the Castrol oil can with vintage logo. Approximately 2.5" in diameter and 3.5" tall. Comes with 2 interchangeable tips. 

Classic Castrol Oil Cans look great in your den or garage, and are even useful for pouring oil without spilling Ref: 216-565

Special U-Joint connects steering rack to inner steering column.  Chrome bumper cars. RD to (c)360300, GT to (c)361000 Also fits MGA 1500,1600 and ...