T-Type Spark Plug Wire setup

posted in: Tech Tips | 0

The T-Type workshop manual has a good description of how to make and install a set of ignition wires. Our ignition wire sets have the wire in one piece, easily enough to make a complete set of wires for an XPAG or XPEG engine. Each wire should end in a wire nut with brass contact washer, the 5 short nuts are for the cap ends, the 1 long nut is for the screw in coil connection. Here are a few more photos than the manual. This might be helpful for those cutting and assembling a set for the first time.